Revive-O-Lution 309User manual · version 1.2.150

The Revive-O-Lution 309 panel: five sections of knobs and buttons, the display, the data wheel and the sixteen pads

Revive-O-Lution 309 is an independent software recreation of the Quasimidi Rave-O-Lution 309. It is not made, endorsed or supported by Quasimidi or anyone connected with it (see About this recreation).

It runs the instrument's original operating system (v3.00b), so the panel, menus, sequencer, patterns and songs behave as they do on the hardware.

It plays the 309's own samples. The instrument's original sample set is built in (see Sound), with the 309's filter, envelopes, effects and equaliser. Its sound has been checked against recordings of a real 309 (see Differences from the original). Everything the 309 plays also comes out as MIDI, one channel per part, so you can play other instruments from it as well.

It comes as a standalone app and a VST3 plugin, plus an Audio Unit on macOS.

1. Installing

Everything the 309 needs is built into the app: there is nothing to find or load, and nothing to choose on first run.

macOS

With the installer (easiest).

  1. Double-click Revive-O-Lution 309 <version>.pkg and follow it. You need your Mac's password. It installs:
    • the VST3 in /Library/Audio/Plug-Ins/VST3
    • the Audio Unit in /Library/Audio/Plug-Ins/Components
    • the standalone app in /Applications

    Customize on the Installation Type page leaves any of them out. An older copy is replaced, including one you copied into your own Library folder by hand.

  2. Rescan plugins in your DAW if it does not find it by itself.

Everything, the installer included, is signed with our Apple Developer ID and notarised by Apple, so macOS installs and opens it without warnings.

To remove it, delete those three items.

By hand, from the zip. From the zip download instead, copy:

  • Revive-O-Lution 309.vst3 → ~/Library/Audio/Plug-Ins/VST3/
  • Revive-O-Lution 309.component → ~/Library/Audio/Plug-Ins/Components/
  • Revive-O-Lution 309.app → /Applications

Windows

The download is a zip holding the VST3 plugin, the standalone app and INSTALL.txt. Nothing else needs installing: Microsoft's C++ runtime is built in.

  1. Before unzipping, right-click the zip, choose Properties, tick Unblock at the bottom and click OK. Then Windows does not warn about anything inside it.
  2. Copy the folder Revive-O-Lution 309.vst3 into C:\Program Files\Common Files\VST3\ (create the VST3 folder if it is not there), then rescan plugins in your DAW. It is an instrument: put it on an instrument track.
  3. Revive-O-Lution 309.exe is the standalone app. Put it anywhere and run it; choose your audio output under Options → Audio/MIDI Settings.

If you skipped step 1, Windows SmartScreen may warn the first time you run the app: choose More info, then Run anyway.

2. First run

  1. Open the standalone app, or put the plugin on an instrument track in your DAW.
  2. The panel comes up straight away.
  3. The first time the app runs, and whenever you add a new copy of the plugin to a project, the 309's memory is empty. The app runs the 309's own Initialize All for you, the same factory reset as on the hardware. It takes a moment.
  4. The display shows 1:Untitled / (STOP) Tempo:140. Press PLAY (or the space bar with the standalone app's panel focused) and the default pattern starts. Its notes also appear on the plugin's MIDI output.

3. The window

On the left of the toolbar are Reset, Initialize All and Options. On the right are a status line, Help, About and, when a new version is out, Update:

ControlWhat it does
ResetRestarts the 309. Your patterns, songs and settings are kept in the 309's memory, as on the real unit. Also applies any change to the expansions.
Initialize AllThe factory reset. It erases every user pattern, song and setting, and asks first.
OptionsEvery setting, in one menu (below).
Update (right, blue)Shown only when a newer version is out. Click it to open the download page in your web browser, read what's new, or skip that version. The check is made at most once a day and sends nothing about you.
Help (right)Switches the panel's help on (lit amber) or off. On, rest the pointer on any knob, button, pad or the display and a card explains it, with a one-line hint in the status line; on the display, it explains the menu page you are on. Off, nothing pops up. It is always off when the app or plugin starts.
About (right)The version, the licence and how to enter a licence key, and a note of whose work is whose.
status (right)Empty unless there is something to tell you: Initializing..., DEMO (no licence key yet, or the licence needs to check in; see About), Reset to apply expansions, or Sound off.

The licence. Without a key the emulator is a demo: the sound, and the notes on its MIDI output, drop out for four seconds in every 40. Enter the key from your order under About. It activates this computer, once, for the standalone app and every plugin format on it together. Copying the settings to another computer does not license that one: enter the key there too, which uses another of your activations. To move to a new computer, click Remove from this computer in About first, so the activation is freed.

Every few days the licence is checked with the licence server. Being offline is fine for up to 30 days since the last successful check; after that it plays as a demo until the computer is online again. It then checks by itself the next time it starts, or straight away with Check now in About.

Options → The panel

ItemWhat it does
FaceplateLight: brushed aluminium with black print. Dark: charcoal with white print; in the enhanced layout its title bars are white too. The choice is remembered.
LayoutOriginal lays out the panel as on the hardware, with nothing added. Enhanced shows each section's Sound number and instrument in its black title bar; click a title bar for a list of every Sound in that section, each with the instrument it uses, and pick one to load it. What an expansion adds is set apart in purple: the Drum-X's drum Sounds 64–127 and the Synth-X's Bass example Sounds 128–159 sit in their own columns, on a purple background under a purple heading, and an instrument, wave or percussion set that only an expansion has is named in purple wherever it appears. Picking an example Sound 128–159 holds Bass SELECT and turns the wheel for you, as you would on the hardware.
ButtonsThe button caps: Blue or Clear.
KnobsHow a knob follows the mouse: turn in a circle (grab it and move round it, like a real knob) or drag up or down.
Data wheelDrag up or down (the default) or turn in a circle.
On-screen keyboardA keyboard under the panel (section 5a).
Release the held buttonsLets go of every button you have latched (below).

These are your own preferences and are remembered between sessions.

Options → The 309

ItemWhat it does
ExpansionsChoose which expansions are fitted: Drum-X, Synth-X and the I/O board. All three are fitted until you choose otherwise. See section 6.
SoundTurn the sound on or off, switch the effects or the equaliser out, and give each part its own output (section 5a). See Sound.
MIDI inputDrum map: one drum clip on channel 1 plays the whole 309 (below). Kept with the session.
MIDI outputWhat the plugin's MIDI output carries: the voices (everything the 309 plays, one channel per part), the 309's MIDI OUT socket, or both; and whether MIDI clock, start and stop are passed (section 5).
Follow the host's tempo and transportHost sync (section 5a).

Below the toolbar is the 309's front panel. Every control on it works. The window can be resized.

4. Playing the panel

With the mouse

  • Buttons: click them. Holding the mouse button holds the button down, so PAGE auto-repeats and SHIFT works as a modifier.
  • Knobs: in circle mode, grab a knob and move round its centre. In up/down mode, drag up or right to turn it up. Hold Shift for fine control in either mode. The scroll wheel also turns the knob under the pointer.
  • Double-click a TUNE knob (kick, snare, hi-hat) to set it back to +0. TUNE is the one knob on the panel that runs from a minus value through zero (−64 to +63); double-clicking any other knob does nothing.
  • Right-click a SOUND, INSTRUMENT, WAVE or PERC-SET knob (or Ctrl-click it) for a list of everything that knob can be set to: the section's Sounds, or its instruments by name. Pick one and the knob turns to it, exactly as if you had dialled it in, and you hear it. What an expansion adds starts its own columns under a purple heading (DRUM-X INSTRUMENTS, SYNTH-X WAVES…), as in the title-bar Sound list.
  • Data wheel (EDIT VALUE / TEMPO): drag up to turn it clockwise and down to turn it back, or scroll over it. Options → Data wheel can make it turn by dragging round it instead.

The rear-panel strip: footswitch and MIDI lights

The strip along the top of the panel carries the labels of the 309's rear sockets. Two things on it work:

  • FOOTSWITCH. Click the label and you are pressing a footswitch plugged into that socket: a yellow light shows under it while it is down. On the 309 the footswitch does exactly what the SHIFT / TAP button does, so it is a second way to hold SHIFT (right-click to latch it) or to tap the tempo.
  • MIDI IN, OUT, THRU have small lights under them in the enhanced layout. IN flickers when MIDI arrives from the host, THRU with it (THRU carries what comes IN), and OUT when the 309 sends something from its own MIDI OUT socket
    • a knob turned, a dump. Clock is left out, or OUT would never go dark. The

    309 itself has no such lights.

The level meters

Where the 309 has its headphone socket, under MASTER-VOLUME, the panel has five level meters instead: one for each section, Kick, Snare, Hi-hat, Percussion and Bass. They show each part as it plays, after MASTER-VOLUME, the EQ and OVERBLAST, before the effects. 0 at the top is a part playing at the instrument's full output; the top two segments are red, the next three amber. A single segment above each bar holds the recent peak for a second. They only show; there is nothing to click. The 309 itself has no meters, and the plugin has no headphone output (use your audio interface's).

Holding more than one button

Several things on the 309 need a button held while you use another control: SHIFT with a pad, PAGE or SONG/PATTERN; a section's SELECT with a knob or the data wheel; SHIFT with SELECT. A mouse has one pointer, so there are two ways:

  • Latch it. Right-click a button (or Ctrl-click it) and it stays held down, marked with a yellow dot. Use the other control as normal, then click the latched button to let go. Any number can be latched at once; Options → Release the held buttons lets go of them all.
  • Use the computer keyboard for one of them. Keys hold their button for as long as they are down (table below): hold t for SHIFT, or a s d f g for a SELECT, and use the mouse for the other control.

With the keyboard

Click the panel first so it has keyboard focus. Keys are held while you hold them. Keys with Cmd, Ctrl or Alt are left to your DAW (save, undo and so on), and in a plugin the space bar stays your DAW's play button.

KeyControlKeyControl
space (standalone app)PLAY.STOP
rRECORDwWRITE / STORE SOUND
eEDITqEXIT
tSHIFT / TAPvVCA-GATE
1 2 3F1 F2 F3[ ]PAGE ◄ ►
; 'SONG/PATTERN ◄ ►- =data wheel left / right
a s d f gSELECT Kick, Snare, Hihat, Perc, BassA S D F GMUTE Kick … Bass
z x c b n m , /pads 1–8

Finding your way around

The essentials:

  • EDIT opens the Select Edit menu; EXIT goes back up a level, to the main screen in the end, and is how you leave the drumgrid and step sequencer. PAGE ◄ ► steps through the Select Edit pages, and F1 F2 F3 pick the item labelled above them on the display:
PageDisplayOpens
1[Sound] [Mix]part sound editing; the part mixer
2[Pattern] [Song]pattern select (ROM, User, and EXP with a Drum-X); songs
3[FX1] [FX2] [EQ]the two effects and the EQ
4[Pads] [System]pad assignments; system and MIDI settings
5 (I/O board only)[Ex1][Ex2][1&2]the Ext1 and Ext2 parts
  • Inside an edit screen, PAGE ◄ ► moves between parameters and the data wheel changes the value.
  • SELECT chooses which part (Kick, Snare, Hihat, Perc, Bass) the edit screens work on. MUTE silences a part.
  • SHIFT and TAP are the same button: held, it is SHIFT; tapped repeatedly, it sets the tempo.
  • WRITE / STORE SOUND opens a confirm prompt (Store Kick? [ok]); F1 confirms.
  • The blue SOUND knob in each section chooses one of that part's stored Sounds: 64 for each drum section (128 with the Drum-X), 128 for the Bass/Lead.
  • The SELECT trick: hold a section's SELECT and the Bass/Lead knobs control that section, so every drum gets cutoff, resonance, envelope and the rest in real time.
  • Initialize All is the factory reset. On the hardware you switch on with WRITE held, then press F1; the toolbar button does it for you.

4a. Sound

The plugin plays the 309's own samples, instruments and percussion kits, and every knob and menu setting shapes the sound as on the hardware: filter, envelopes, LFO, glide, drive, the reverb and chorus with their sends, and the equaliser.

  • Every sample is built in: the instrument's original sample set, the extra sounds that come with its operating system (MoogZap, MogSnare, PicSnare, Modulo, the noises and others), and with a Drum-X fitted its extra sounds. They are used as they are, unaltered.
  • Options → Sound → Sound on switches the sound off, for when you only want the MIDI output. While it is off, the status line says Sound off.

How closely it matches a real 309 is in Differences from the original.

5. MIDI output and input

What comes out

With Options → MIDI output set to The voices (the default), the plugin's MIDI output carries everything the 309 plays - its patterns, your knob moves, notes coming in - with one channel per part. Note names here are Ableton's (C1 = note 36):

ChannelPartNotes it sends
1KickC1 (36)
2SnareD1 (38)
3HihatF#1 (42) closed, A#1 (46) open
4PercC#-2 to C-1 (notes 1–12), one per pad; not the C1–B1 it takes in
5Bass-LeadC2 (48) and up
14Ext1only with the I/O board fitted
15Ext2only with the I/O board fitted

What it is for: playing other instruments from the 309. Put a synth or drum plugin on another track, set that track's MIDI From to the 309's track and pick a channel - channel 5, say, and the synth plays the 309's bass line. Or record the 309's patterns as MIDI notes you can edit. If you only want the 309's own sound, leave this alone: it changes nothing you hear.

These channels are fixed: they stay the same whatever the 309's System channel is set to. The channels the 309 listens on work differently (below).

Turning a knob sends that parameter as a controller on the part's channel, with the same numbers the 309 accepts coming in (the tables under What goes in). Master Volume and Overblast send messages of their own (section 7).

The 309's MIDI OUT socket sends what the 309 sends from its own MIDI OUT socket on the back, such as knob moves and dumps. Both merges the two.

MIDI clock, start and stop are left out unless Pass MIDI clock, start and stop is ticked.

What goes in

MIDI arriving at the plugin goes to the 309's MIDI IN, in time with your DAW. Here the 309's own channel map applies. Channels count up from the System channel (EDIT → page 4 → F3 System, page 1), which is 1 from the factory:

PartMIDI IN channel (System channel 1)
Kick, Snare, HiHat, Perc, Bass1, 2, 3, 4, 5
Ext1, Ext2 (I/O board, Trigg: Midi)6, 7

Notes play the parts: any key plays the Kick, Snare or HiHat; keys 36–47 (C1–B1) play the twelve pads of the Percussion set; the Bass/Lead plays the key you send. Velocity and Pitch Bend are followed.

The drum map

The 309 wants each part on its own channel, so a DAW needs a track per part. Options → MIDI input → Drum map lets one ordinary drum clip, on channel 1, play everything instead, by the layout nearly every drum machine and drum MIDI file uses:

Note on channel 1 (Ableton's names)Plays
C1 (36), B0 (35)Kick
C#1–E1 (37–40)Snare
F#1, G#1 (42, 44)Hi-hat, closed
A#1 (46)Hi-hat, open
any other note below C3Percussion: the pad the note falls on (C, C#… B → pads 1–12)
C3 (60) and upBass/Lead, at the note played

Velocity carries through; note-offs follow their notes. Everything else on channel 1 (controllers, program changes) still goes to the Kick part, and the other channels work as always, so the drum map and per-channel tracks can be mixed. It is off by default and kept with the session. Off, the 309 behaves as the real one: every note on channel 1 plays the Kick.

Every control, and the message that sets it

Send these on the section's channel. Each takes the full range, 0–127, and sets the same value the knob would.

Knob on the panelSections that have itMessage
SOUNDall fiveProgram Change (the Sound number)
INSTRUMENT / WAVE / PERC-SETall fiveCC 12
LEVELall fiveCC 7
TUNEKick, Snare, HiHatCC 14
TONESnare, PercCC 16
CUTOFFBass/LeadCC 16
RESONANCEBass/LeadCC 17
ATTACKKick, Bass/LeadCC 18
DECAYall fiveCC 19
SUSTAINBass/LeadCC 20
ENVMODBass/LeadCC 23
ACCENTBass/LeadCC 25
GLIDEBass/LeadCC 5
MASTER-VOLUME, OVERBLAST, LOOP-FADEglobalno MIDI message in; automate them as plugin parameters (section 5a)

The parameters that have no knob of their own, from the Sound and Mix menus, are also controllers on the section's channel:

ParameterMessageParameterMessage
Sound levelCC 11VCF driveCC 15
Cutoff (drum sections)CC 16Resonance (drum sections)CC 17
Envelope attack, decay, sustain, releaseCC 18, 19, 20, 21VCA gateCC 22
Envelope → filter (EnvMod)CC 23Velocity → filter (DynMod)CC 24
AccentCC 25GlideCC 5
LFO depthCC 26LFO waveCC 27
LFO rateCC 28LFO → pitch, filter, ampCC 29, 30, 31
PanCC 10Effect sends, FX1 and FX2CC 91, CC 93
Hold pedalCC 64Mod wheel (LFO → pitch depth)CC 1
All sounds offCC 120Reset controllersCC 121
Local on / offCC 122All notes offCC 123

The second table is from Quasimidi's manuals. A controller changes the sound and the value on the display, but the knob on screen does not turn — the 309's knobs are not motorised, and neither are these. The 309 can be told to ignore incoming controllers or program changes: EDIT → page 4 → F3 System, RxParam and RxProgCh.

To follow your DAW's tempo and transport, see host sync in the next section.

5a. In a DAW, and the Options menu

These are the plugin's own additions; the 309 has none of them.

Host sync (Options → Follow the host's tempo and transport). The 309 normally runs on its own clock. With this ticked it starts, stops and keeps time with your DAW, at the DAW's tempo. Start from the top of the project, or loop back to its start, and it starts exactly on the beat. Start anywhere else and it picks up at the next sixteenth, but plays that first step a sixteenth late and the one after it straight away, then runs in time: a real 309 slaved to a DAW does the same. The 309's own PLAY and tempo do nothing while it is on. It is kept with the session, and is greyed out in the standalone app, which has no host.

Automation. Every knob on the panel is a plugin parameter, named by its section and label (Bass Cutoff, Kick Sound, Master Volume…). The host can automate them, and a knob turned on the panel is reported to the host, so it can be recorded. Knob positions are saved with the session.

Separate outputs (Options → Sound → Separate outputs for Kick, Snare, HiHat, Perc and Bass). Tick this to give each of those parts an output of its own, beside the main one. A part whose output your DAW uses leaves the main mix and comes out there, without reverb or chorus (the equaliser and Overblast still apply); the reverb and chorus stay on the main output. It is off at first, because some DAWs (Ableton Live) switch every output on by themselves, which would leave the main track silent. In Live, take a part's output on an audio track: Audio From the 309's track, then the part, with Monitor on In.

Effects and equaliser (Options → Sound → Effects, Equaliser and Overblast). The 309's own reverb and chorus are off by default, so the sound is ready for your own effects; tick Effects to hear the 309's. The equaliser and Overblast are on by default: Overblast is a panel knob and part of the 309's tone. Both choices are kept with the session.

Hearing a Sound. In the enhanced layout the yellow triangle in a section's title bar plays its Sound once, and so does picking a Sound from the list. Options → On-screen keyboard adds a keyboard under the panel; the box beside it chooses the section it plays. The Bass/Lead plays the key you press, a drum section plays its sound on any key, and the percussion set plays its twelve pads from each C upward. You hear these notes and they appear on the MIDI output (The voices), but the 309's sequencer does not record them.

Ableton Live, step by step

The same ideas work in any DAW; the names below are Live's.

Put the 309 on a track. Drag Revive-O-Lution 309 from the browser (Plug-ins) onto a MIDI track. On a Mac there are two entries: AUv2 (the Audio Unit) and VST3. Either plays; only the AU takes program changes (below).

The 309 plays its own pattern when I press Live's Play. That is host sync: untick Options → Follow the host's tempo and transport. It is kept with the Live set, so check it in each set. With it off, Live's Play only plays your clips; the 309's own sequencer runs only if you press PLAY on its panel.

Play every part from one clip. Tick Options → MIDI input → Drum map and put an ordinary drum clip on the 309's track: C1 kick, D1 snare, F#1 hi-hat, and so on (the drum map). Without it, every note on the 309's track plays the Kick, because Live sends a track's notes on channel 1.

Or one MIDI track per part. Each part listens on its own channel (Kick 1, Snare 2, HiHat 3, Perc 4, Bass 5). For each part:

  1. Create → Insert MIDI Track, with no instrument on it.
  2. Show the routing: the I/O button at the right of the mixer.
  3. In the new track's MIDI To: first box, the 309's track; second box, Revive-O-Lution 309 (not Track In); third box, the part's channel. The third box appears only once the second names the plugin.
  4. Its clips now play that part. You need not arm or monitor the 309's track.

Change a part's Sound.

  • Program change, AU only. In a clip on the part's track, set Pgm in the clip's settings. Live counts from 1 and the 309 from 0, so Pgm 17 is Sound 016. Live sends it only when the clip starts. The VST3 format does not pass program changes on to a plugin as MIDI, so the VST3 (and every Windows host) never receives them.
  • Automation, both formats. Every knob is a parameter. In a clip on the 309's track, open Envelopes, choose Revive-O-Lution 309, then Snare Sound, Bass Cutoff or any other knob, and draw it. The 309's display shows each change.

Get the audio out.

  • Hear it: the 309's track goes to Main like any other.
  • Record it: an audio track with Audio From set to the 309's track (Post FX), armed; or Freeze Track then Flatten on the 309's track.
  • Export it: File → Export Audio/Video, with Rendered Track on Main, or All Individual Tracks for a file per track.
  • Each part on its own track: tick Options → Sound → Separate outputs, then for each part an audio track with Audio From the 309's track and, in the box below, Kick, Snare, HiHat, Perc or Bass, Monitor In. Record those, or export them with All Individual Tracks.

6. Expansions

The real 309 took three paid upgrades, fitted inside the unit. Here all three are fitted from the start. To choose for yourself, open Options → Expansions and tick the ones you want; your choice is remembered from then on, for the app and the plugin alike.

The Drum-X brings its own factory patterns. Initialize All with the Drum-X fitted loads its pattern set; without it, the standard one. So two computers with different expansions show different factory patterns, and ticking the Drum-X later does not change the patterns already in memory until you run Initialize All again.

ExpansionWhat it isWhat changes
Drum-X (Drum & Percussion, v1.1)more drums and percussion33 new Kick, Snare and HiHat waves (14, 11 and 8); 128 new percussion instruments; 128 Sound memories per drum section (new factory sounds from 64 up); 20 percussion sets; an LFO for every drum section, tempo-syncable; 38 extra patterns (Load EXP-Pattern).
Synth-X (Synth, v1.0)more synth sounds for the Bass/Lead37 new oscillator models for the Bass/Lead (Spectra…, TB303…, chords); filter types LP24 / LP12 / HP12 on Edit Sound page 23; a tempo-syncable LFO; 32 example Sounds at Bass 128–159 (hold Bass SELECT, turn the wheel past 127: Exp-Sound: 128). With the I/O board also fitted, Ext1/Ext2 become two more synths.
I/Oan input/output board; it adds no soundsOn the real unit it adds two audio inputs and outputs 3/4, which are not available here (section 9). Here it adds the Ext1 / Ext2 parts: menu page 5, with filter, envelope, LFO, VCA gate and a trigger source. They come out on channels 14 and 15 of the MIDI output, and listen on MIDI channels 6 and 7 at MIDI IN.

A change applies at the next reset. Like the real 309, it only looks for its expansions as it starts, so after you tick one the app asks Reset now?. Choose Reset now, or Later. Until you reset, the status line reads Reset to apply expansions, and the menu offers Reset now to apply.

The start-up screen confirms it. Each time the 309 starts, its logo shows for a moment before the main screen. Its second line shows what the 309 found, for example Expanded: D, Expanded: S, Expanded:I/O or Expanded:I/O D S. With nothing fitted the line is skipped. (A real 309 takes several seconds to start; the plugin does it at once.)

Using the Ext parts (I/O board)

  1. Tick I/O and reset.
  2. Open Ext1. Either press EDIT, then PAGE ► to page 5 [Ex1][Ex2][1&2] and press F1, or double-click F1 from the main screen (F2 for Ext2, F3 for both together).
  3. Its Mix pages are 1 MixLevel, 2 Pan (which can route to OUT3/OUT4), 3–4 the FX sends, and 5 Trigg: NoTrg, Kick, Snare, Hihat, Perc, Bass or Midi. The remaining pages are its sound: filter, envelope, VCA gate, LFO.
  4. Hold F1 (Ext1), F2 (Ext2) or F3 (both) and turn the Bass/Lead knobs to play its parameters live.
  5. Its wave reads --- while it is not triggered. On a real 309 that means the audio input passes straight through the filter and amp. With Synth-X also fitted, once a trigger is set the wave can be a synth model (MoogWav1, TB303_a1, …) or In1/In2 for the audio input.
  6. With a drum or Bass trigger, press PLAY: Ext1 plays in step with that track. With Midi, send notes to the plugin on MIDI channel 6 (Ext2: 7). Either way, Ext1 appears on channel 14 of the MIDI output.

On the hardware, WRITE page 13 Init Ext? resets both inputs to plain stereo throughput.

The audio inputs and outputs themselves are not available (section 9).

Your expansion choice is saved with each DAW session, and the app remembers it as the default for new ones. New installs start with no expansions fitted.

7. The global knobs: Master Volume and Overblast

These two knobs sit outside the five part sections and work on the whole mix.

  • MASTER-VOLUME sets the overall level.
  • OVERBLAST (display: Ovrblast: 0–15) is a bass boost. Quasimidi's manual calls it "a linear addition to the bass tone range… similar to a contour control", and warns that too much distorts the whole output.

A synth on the MIDI output will not follow either knob unless it understands the 309's own messages for them.

LOOP-FADE, beside them, sets the level of the Special Loop Tracks and, while you record a pattern with the metronome on, the level of the metronome, as on the hardware.

A new instance starts with MASTER-VOLUME, LOOP-FADE and each section's LEVEL knob fully up, OVERBLAST fully down, and every other knob at its centre. Knob positions are saved with the session, so a session you have already saved opens with the knobs where you left them.

8. Saving your work

  • In a DAW, the project saves the 309's whole memory (every pattern, song and setting), where the knobs stand, the expansions, and your Options choices (sound, effects, MIDI, host sync, drum map). A reopened project boots exactly where it was, without Initialize All.
  • Store sounds and patterns on the 309 itself with WRITE and the pattern and song menus, as on the hardware. They live in that memory and are saved with it.
  • Your preferences (faceplate, layout, buttons, knob and wheel modes, the default expansions) and your licence are kept for every copy of the app and plugin on the computer, in ~/Library/Application Support/Rave309Emulator/ (macOS) or %APPDATA%\Rave309Emulator\ (Windows).

9. Differences from the original

  • The sound. It is very close to a real 309: the same patterns recorded from a real 309 and from the plugin match closely. A few small differences remain: at its very lowest cutoff the filter is a little darker, a strongly resonant sweep is slightly brighter, and a short kick's quiet tail is shorter. The samples themselves are the instrument's own, unaltered.
  • Sample rate. The plugin's sound engine runs at 44.1 kHz whatever rate your project uses, so the 309 sounds the same at 44.1, 48 or 96 kHz. At other rates its output is converted once, which delays it by about a millisecond or less; the plugin tells the host, which makes up for it.
  • Level. As on a real 309, every part at full with OVERBLAST up can go past full scale; nothing limits it. If your DAW's meter shows clipping, turn MASTER-VOLUME down a little.
  • Reverb and chorus. The 309's own reverb and chorus have not been compared with a real unit.
  • Effects, EQ and Overblast on another synth. These are part of the 309's own sound. A synth played from the MIDI output follows them only if it happens to understand the 309's messages for them.
  • The I/O board's audio. Ext1 and Ext2 work as parts and send MIDI, but there are no audio inputs and no outputs 3/4.
  • Recording the on-screen keyboard. Its notes are played, not recorded by the 309's sequencer; use a MIDI keyboard on channels 1–5 for that.

The sequencer, patterns, songs, Sounds, menus, parameter values and the MIDI it sends are the 309's original operating system, unaltered.

10. Troubleshooting

SymptomWhat to do
The display says Firmware errorThe installation is damaged: reinstall the app. There is nothing to load by hand.
PLAY does nothing, or no notes come outIf Options → Follow the host's tempo and transport is ticked, the panel's PLAY does nothing: start your DAW instead, or untick it. Otherwise click Initialize All.
Nothing reaches my synthRoute the plugin's MIDI output to the synth's track. Beside its own sound the plugin outputs MIDI. Check Options → MIDI output is set to the voices.
The standalone panel runs but no MIDI comes outMIDI output needs an audio device. Choose one in the app's audio settings.
I ticked an expansion and nothing changedClick Reset, or Reset now at the prompt. The start-up screen's Expanded: line shows what is fitted.
Menu page 5 is missingFit the I/O expansion and reset.
Ext1's wave only shows IN1 or ---Synth waves for the Ext parts need Synth-X fitted as well, and a trigger set on Mix page 5. --- means no trigger is set.
Nothing plays Ext1 from my DAWSet Ext1's Trigg: to Midi, and send on MIDI channel 6 (Ext2: 7). Those follow the System channel.
macOS says the plugin is damaged or will not load itReinstall from the installer you downloaded with your order, then rescan plugins in your DAW. If it still happens, write to info@revive-audio.com.
The 309's pattern plays when I press Play in my DAWUntick Options → Follow the host's tempo and transport.
Every note in my drum clip plays the kickA DAW sends a track's notes on channel 1, the Kick's. Tick Options → MIDI input → Drum map, or give each part a track on its own channel (Ableton, step by step).
Program changes from my DAW do nothingThe VST3 does not receive them: use the AU (Mac), or automate the section's Sound parameter.
The 309's track in Ableton is silentUntick Options → Sound → Separate outputs, or take the parts from their own outputs (Ableton, step by step).
The bass is too quietIn the factory patterns the Bass/Lead LEVEL knob is at about three quarters, below the drums, as on the original. Turn it up (full is about 5 dB louder) and store it with WRITE, or set the Bass Level parameter in your DAW. For more low end, turn up OVERBLAST, or mix the bass on its own output (Options → Sound → Separate outputs). Deep bass also sounds quieter than it is on laptop speakers and many headphones.
The output clips with OVERBLAST upTurn MASTER-VOLUME down a little. Like a real 309, the plugin does not limit its output.
Which version do I have?Click About: it shows the version and build.

About this recreation

Revive-O-Lution 309 is an independent recreation by Revive Audio. It is not made, endorsed, sponsored or supported by Quasimidi Musikelektronik GmbH or by anyone who now holds its rights.

What is Quasimidi's. The Rave-O-Lution 309 was designed and made by Quasimidi Musikelektronik GmbH, of Germany. The instrument's name, its front-panel design, its operating system and its sound samples are Quasimidi's work. They are included so that the instrument can still be played; no ownership of them is claimed, and all rights in them remain with whoever holds them today. "Quasimidi" and "Rave-O-Lution" are used only to say which instrument this recreates.

What is Revive Audio's. The recreation itself: the model of the 309's electronics, the sound engine that recreates its sound, and the application and plugins. None of that comes from Quasimidi. A licence you buy is for that work.

If you hold rights in the Rave-O-Lution 309, or in anything of Quasimidi's used here, and have a concern, please write to info@revive-audio.com.

The same notice is in the app and plugin, under About.